10+ Years of Experience
Same-Day Service Available
Quick Fix Appliance Experts repairs washing machines of every major brand in Greater Victoria, the Hamilton and Halton area, and Edmonton.
Same-Day Service
90-Day Guarantee
10+ Years of Experience
Same-Day Service
90-Day Guarantee
10+ Years of Experience
A washer that will not fill, drain or spin can stop a whole household. Quick Fix Appliance Experts sends trained technicians to homes in Greater Victoria, Hamilton, Burlington, Oakville and Edmonton to repair top-load, front-load and stacked washers. We test the parts that actually failed, give you the price before any work starts, and back every repair with our 90-day guarantee. Looking for a local team? See our washer repair pages for Greater Victoria, Hamilton and Edmonton.
Most washer breakdowns we see come from a handful of worn parts: drain pumps, door locks, inlet valves, shock absorbers and control boards. Here are the faults we repair most often, and what usually causes them.
A washer that hums but will not fill usually has a clogged inlet screen, a failed water inlet valve, or a pressure switch that no longer reads the water level.
If every load comes out cold or too hot, the inlet valve may be stuck on one side, or the temperature sensor or control board is misreading the setting.
Front-load washers will not start until the door locks. A worn latch, a broken lock switch or a cracked strike stops the cycle before it begins.
Heavy shaking or walking across the floor points to worn shock absorbers, broken suspension springs, a failing drum bearing, or a washer that is no longer level.
A washer that stays on one stage, or skips rinse or spin, often has a stuck timer, a failed lid switch, or a control board fault that we can test on site.
Leaks usually come from a cracked fill hose, a torn door boot, a loose drain hose, or a worn tub seal. We find the source so the floor stays dry.
A small noise or slow drain today can become a seized pump or flooded laundry room tomorrow. Book a technician now and get your washer back to normal.
Our technicians have more than 10 years of hands-on washer repair experience. We work on the machines people actually own, from older top-loaders to new high-efficiency front-loaders, and we explain the fault in plain words before we fix it.

At Quick Fix Appliance Experts, we stand behind the quality of our appliance repair services with a 90-day service guarantee. If the same issue returns within the guarantee period, simply contact our team and we’ll inspect the problem and provide the appropriate support. Our goal is to deliver repairs, careful work, and lasting solutions that give you greater peace of mind.
If the same repair issue returns, contact us and our team will help resolve it quickly.
Every repair is completed with care, reliable parts, and professional techniques for performance.

A few easy habits keep your washer cleaner, quieter and less likely to break down. These are the tips our technicians give most often.
Once a month, run an empty hot cycle with washer cleaner or vinegar to clear soap build-up and odour from the drum and hoses.
Check the fill hoses for cracks or bulges once a year. Replace rubber hoses with braided steel ones every 5 years.
Stay within the drum's load size. Overloading wears the bearings, shocks and belt much faster.
Leave the door open after each load and wipe the door seal so moisture can dry and mould cannot grow.
Book a yearly check so a technician can test the pump, shocks and door lock before a small problem becomes a breakdown.

A broken washer backs up a household in days. We offer same-day washer repair in our service areas when you book early, and most repairs are finished in one visit with parts from our truck.
We repair top-load, front-load, high-efficiency, stacked and compact washers, including washer-dryer laundry centres found in condos and townhomes.
Our trained technicians explain the problem and the cost before they start, and tell you honestly when a repair is not worth it on an older machine.
We repair washers from all major brands, including Samsung, LG, Whirlpool, Maytag, GE, Bosch, Electrolux, Frigidaire, Kenmore, and more. Each brand uses its own motors, control boards, and fault codes, so our technicians match the diagnosis to your specific model.
Clean the drum and door seal monthly, check hoses yearly, use HE detergent in HE machines, and keep loads within the drum’s size.
We provide in-home washer repair in Greater Victoria (Victoria, Saanich, Oak Bay, Esquimalt, Langford, Colwood), the Hamilton and Halton area (Hamilton, Stoney Creek, Ancaster, Dundas, Burlington, Oakville), and Edmonton, with same-day availability in each area.








This usually means a clogged drain pump filter, a kinked or blocked drain hose, or a drain pump that has failed. Socks and coins caught in the pump are a very common cause.
This often means the washer is not reaching full spin speed. Common causes are an unbalanced load, a slow drain, a worn drive belt or motor coupling, or a faulty lid or door lock switch.
Stop the washer and turn off the water supply. Then check the fill hoses, the door seal and the drain hose. If you cannot find the leak, book a technician before water damages the floor.
Shaking and banging during spin is usually caused by an uneven load, a washer that is not level, worn shock absorbers or suspension springs, or a failing drum bearing.
Yes. Every completed washer repair is backed by our 90-day guarantee on parts and labour. If the same problem comes back, we come back.
Get honest help from experienced technicians in Greater Victoria, Hamilton, Burlington, Oakville and Edmonton. Book your washer repair today and get your laundry moving again.